MacroWind renewable power Inc.,China (Wind Turbine,Wind Generator,Solar System)



	MW - 200 Turbine

	MW - 400 Turbine

Controller & Inverter r

Tower Kits

Accessories

Inverter

Residential Power Sys

Street Lamp Power Sys





Our Angency in Scandinavien

MacroWind offers a line of accessories for your turbine and hybrid system. Some of these accessories are difficult to find due to the high DC outputs. We offer them as a convenience.

Circult Breaker

M4A01 　(Available)

A Circuit Breaker is required with any electrical installation. In the event of a system or turbine failure the circuit breaker disconnects the battery and prevents the possibility of further damage.
For MW-200 turbine: 12 volt = 30 amp; 24 volt = 20 amp
For MW-400 turbine: 12 volt = 50 amp; 24 volt = 30 amp

We can supply small automotive type DC circuit breakers for 12 or 24 volts DC. Not recommended for 48 volt systems.

Breaker Holder	M4A02 　(Available)
	Electrical:For currents up to 30A Housing material: Nylon with glass fiber Contacts: Brass

Stop Switch	M4A03 　(Available)
	The 30-amp DC Stop Switch can be used to “stop” the turbine for service or any other reason. A stop switch is not necessary, but most customers find it very useful.

Amp meter	M4A04　 (Available)
	The Amp Meter allows you to monitor the output of your turbine. Place it in between your turbine and the battery on the positive lead. It will give you instantaneous readings of output in amps. Range: 30A DC; Size: 45*45mm; (Requires external shunt-included)